✅ 기본 전제
-
TPM이 내장된 CPU 사용 여부에 따라 다름
(예: 인텔 11세대 이상, AMD Ryzen 2000 시리즈 이상 대부분 지원)
🔧 TPM 설정 방법 (ASUS UEFI BIOS 기준)
1. BIOS 진입
-
PC 부팅 중
Del또는F2키를 반복해서 눌러 BIOS로 진입합니다.
2. Advanced Mode 전환
-
기본 EZ Mode로 진입되면,
F7키를 눌러Advanced Mode로 전환합니다.
3. TPM 설정 위치
🔹 인텔 CPU 사용 시
-
Advanced탭 →PCH-FW Configuration→
PTT (Platform Trust Technology) 설정-
Disabled→Enabled로 변경
-
🔹 AMD CPU 사용 시
-
Advanced탭 →AMD fTPM Configuration→
TPM Device Selection 항목-
Discrete TPM또는Firmware TPM선택
(보통 Firmware TPM이 기본값)
-
4. 저장 후 재부팅
-
F10→ 저장 후 재부팅 -
Windows에서
tpm.msc실행 → TPM이 활성화되어 있는지 확인
⚠️ 주의 사항
-
Discrete TPM은 별도 모듈을 의미하며, 해당 모듈이 장착된 경우만 선택합니다.
-
Windows 11 설치를 위해서는 Firmware TPM(PPT/PTT) 만 활성화해도 충분합니다.
-
BIOS 업데이트 후 TPM 설정이 초기화되는 경우가 있으니 재확인 필요합니다.
✅ Prerequisites
-
Your CPU must support TPM, either via firmware (Intel PTT / AMD fTPM) or a discrete TPM module.
-
Most modern Intel (11th Gen+) and AMD (Ryzen 2000+) CPUs support firmware-based TPM.
🔧 How to Enable TPM on an ASUS Motherboard (UEFI BIOS)
1. Enter BIOS
-
While your PC is booting, repeatedly press the
DelorF2key to access the BIOS setup.
2. Switch to Advanced Mode
-
If you’re in EZ Mode, press
F7to enter Advanced Mode.
3. Navigate to TPM Settings
🔹 For Intel CPUs:
-
Go to
Advancedtab →PCH-FW Configuration -
Find PTT (Platform Trust Technology) and set it to
Enabled
🔹 For AMD CPUs:
-
Go to
Advancedtab →AMD fTPM Configuration -
Set TPM Device Selection to
Firmware TPMorfTPM
4. Save and Exit
-
Press
F10to save changes and reboot the system.
5. Verify in Windows
-
After reboot, open the Run dialog (
Win + R), typetpm.mscand hit Enter. -
You should see that TPM is now enabled and ready for use.
⚠️ Notes
-
Discrete TPM refers to a physical TPM chip; only select this if you have a TPM module installed.
-
Firmware TPM (PTT or fTPM) is sufficient for Windows 11.
-
Some BIOS updates may reset TPM settings—double-check after flashing.
댓글 없음:
댓글 쓰기